ALB's Organic Chemicals Website: www.albtechnology.com
ALB's Magnets Website: www.albmagnets.com

Chemical Properties Of Tantalum

Tantalum 05/29/2020

chemical properties of tantalum

Chemical Properties Of Tantalum

Facts about Tantalum: Applications & Uses

Tantalum (Ta) is an unsung hero in modern metallurgy.

First discovered by the Swedish chemist Anders Ekeberg in 1802, this versatile metal has become essential to numerous industries over the years.

Raw tantalum rarely occurs in nature.

Instead, it is typically found in the ore columbite-tantalite (usually referred to as coltan).

Once extracted, pure tantalum is a hard blue-gray lustrous metal.

Since its discovery, tantalum has been used in a number of applications.

In the 21st century, it has become a crucial element in the electronics industry, with over 75% of electronics containing tantalum in some form.

In particular, engineers have been able to take advantage of some of the tantalum’s properties to make capacitors and other components smaller and more efficient.

Properties of Tantalum

Tantalum has several unique characteristics that have led to its increased use in the 21st century.

It is a highly stable metal that is almost immune to chemical degradation at temperatures lower than 302 °F (159 °C).

In addition, it exhibits high levels of corrosion resistance when it comes into contact with air and moisture.

Like most metals, tantalum forms a thin but dense protective oxide layer (Ta2O5) when exposed to the atmosphere.

This oxide layer firmly adheres to the surface of the metal, acting as a barrier that protects the underlying metal from further corrosion.

Tantalum belongs to a class of metals known as refractory metals, which are defined by their strong resistance to heat and wear.

It has a melting point of 5,463 °F (2,996 °C), the fourth-highest of all metals.

In terms of mechanical properties, tantalum is highly ductile, making it suitable for processes such as bending, stamping, and pressing.

When combined with other metals, it can produce alloys with enhanced strength and higher melting points.

Zirconium Molybdenum Niobium Tantalum Nickeltungsten Titanium

Common Uses of Tantalum

Tantalum is generally used in applications that require increased heat, corrosion, and chemical resistance.

Below is a list of the commonly available forms of tantalum and their most common uses.

Sheet/Plate – Tantalum’s high melting point makes it ideal for high-temperature applications.

In sheet form, it is commonly used in linings for columns, vessels, tanks, heat exchangers, and vacuum furnace parts.

Thin sheets can also be used for anti-corrosion cladding, repairs, and reinforcement of existing

Rod/Wire – Tantalum is also known for its biocompatibility.

In other words, it is a nonirritating element that is not affected by bodily fluids.

This property makes tantalum wires a popular material for prosthetic implants and other medical devices.

In addition, tantalum wires are commonly used in vacuum furnace heating elements, chlorinator springs, light bulb elements, and chemical processing equipment.

Powder – In its powder form, tantalum is used to produce electrical circuits, capacitors, and resistors, primarily because its superior capacitance allows it to hold more charge per gram than other materials.

This has made it possible to develop smaller electrical parts and, by extension, smaller electrical devices.

Tube – Because of their heightened resistance to corrosion, tantalum tubes are often employed in the chemical, petrochemical, and pharmaceutical industries for the processing of compounds that may weaken or destroy other metals.

Columns, stacks, and piping are just some of the products constructed from tantalum tubing in these industries.

Strips and foils – Similar to sheets, tantalum strips, and foils can be used as liners in vacuum furnaces and heat insulation applications.

Thin-gauge tantalum strips can also be deep drawn to manufacture crucibles, cups, and other inert laboratory equipment.

chemical properties of tantalum

Atomic Number: 73 Atomic Symbol: Ta Atomic Weight: 180.94788 Melting Point: 5,462.6 F (3,017 C) Boiling Point:9,856.4 F (5,458C)

Word origin: Tantalum is named after a Greek mythological character, Tantalos.

Discovery: Tantalum was discovered by Anders Ekeberg in 1802.

High Quality And New Product Dia0

It was thought tantalum and niobium were identical elements until Rowe in 1844, and Swiss chemist Jean Charles Galissard de Marignac, in 1866 showed they were different acids.

Properties of tantalum

Tantalum is a hard, grey, ductile metal.

In its pure form, it can be drawn into a fine wire.

Tantalum is nearly immune to chemical attacks at temperatures below 302 F (150 C).

Tantalum oxide films are very stable and have good rectifying as well as dielectric properties.

It has a melting point only exceeded by two other elements and becomes much more reactive at high temperatures.

[See Periodic Table of the Elements

Sources of tantalum

Tantalum occurs naturally in the mineral columbite-tantalite.

It’s mainly found in Australia, Brazil, Mozambique, Thailand, Portugal, Nigeria, Zaire, and Canada.

Separating tantalum from niobium requires either electrolysis, reduction of potassium fluorotantalate with sodium, or reacting the carbide with oxide.

Natural tantalum contains two isotopes while twenty-five isotopes are known to exist.

Uses of tantalum

Tantalum is used in a variety of alloys to add high strength, ductility, and a high melting point.

When drawn into a fine wire, it’s used as a filament for evaporating metals such as aluminum.

More than half of tantalum’s use is for electrolytic capacitors and vacuum furnace parts.

The element is also used to make chemical process equipment, nuclear reactors, aircraft, and missile parts.

Tantalum has found use in making surgical appliances because it’s completely immune to body liquids.

Tantalum oxide is used to make special glass with a high index of refraction for items such as camera lenses.

High Purity 99.95 Niobium Foil

Tantalum (Ta) - Chemical properties

Tantalum is a shiny, silvery metal that is soft when is pure.

It is almost immune to chemical attack at temperatures below 150 C.

Tantalum is virtually resistant to corrosion due to an oxide film on its surface.

Applications

Tantalum finds use in four areas: high-temperature applications, such as aircraft engines;

electrical devices, such as capacitors;

surgical implants and handling corrosive chemicals.

It is rarely used as an alloying agent because it tends to make metals brittle.

Tantalum resists corrosion and is almost impervious to chemical attack, for this reason, it has been employed in the chemical industry, e.g.

for heat exchanger in boilers where strong acids are vaporized.

Tantalum in the environment

Because tantalum oxide is very insoluble, there is almost no tantalum to be found in natural waters.

Few attempts have been made to measure its level in soils, revealing a range from 0.1 to 3 ppm.

Only tiny amounts of tantalum are taken by plants: the amount in vegetation rarely exceeds 5 ppb.

The chief tantalum ores are tantalite, which also contains iron, manganese and niobium, and samarskite, which contains seven metals.

Another ore which contains tantalum and niobium is pyrochlore.

The main mining areas are Thailandia, Australia, Congo, Brazil, Portugal, and Canada.

The demand of tantalum is about 2300 tonnes a year.

No assessment of total reserves of extractable metal has been reliably calculated.

Factory Manufactory Tantalum Thin Discs

Health effects of tantalum

May be harmful by inhalation, ingestion, or skin absorption.

It causes eye & skin irritation.

Material is irritating to mucous membranes & upper respiratory tract.

There are no reports of adverse health effects in industrially exposed workers.

Massive doses of tantalum given by the intratracheal route to rats have produced respiratory tract lesions.

In contact with tissue, metallic tantalum is inert.

Do not allow material to be released to the environment without proper governmental permits.

Isolate runoff of tantalum oxide to prevent environmental pollution.

Tantalum (Ta) - Properties, Applications

Tantalum is a chemical element with Ta as its symbol.

It belongs to group 5, periodic number 6 of the periodic table.

Its atomic number is 73.

Tantalum is a silvery metal that is soft in its pure form.

It is a strong and ductile metal and at temperatures below 150°C (302°F), this metal is quite immune to chemical attack.

It is known to be resistant to corrosion as it displays an oxide film on its surface.

This metal is rarely used as an alloying agent as it makes metals brittle with an exception of steel, in which case tantalum increases the ductility, strength and melting point of steel.

Although quite rare, tantalum is obtained from minerals such as tantalite, columbite, and euxenite.

Tantalum Discovery and naming

In 1801, English chemist Charles Hatchett (1765-1847) discovered a new element that he named niobium.

Alloy Solder

A year later, Ekeberg discovered a new element that he named tantalum.

The two names are related.

Niobium was named for the mythical daughter of Tantalus, Niobe.

Tantalus was a son of Zeus, the major Greek god.

Zeus decided to punish his son for giving the gods' secrets to humans.

He forced Tantalus to stand in a vat filled with water up to his chin.

Whenever Tantalus bent to take a drink, the water dropped a little lower so he could never get his drink.

Ekeberg said that his new element was like Tantalus.

When placed in acid, it did not take up (react with) the acid.

Most chemists thought that the two men's discoveries were one and the same.

The two elements reacted exactly like each other.

They could not see how tantalum was different from niobium.

For more than 40 years, the general belief was that Ekeberg and Hatchett had discovered the same element.

In 1844, however, German chemist Heinrich Rose (1795-1864) announced new evidence.

He found that tantalic acid (H 3 TaO 4 ) made from tantalum and niobic acid (H 3 NbO 4 ) made from niobium were definitely different from each other.

He confirmed that Ekeberg and Hatchett had really discovered two different elements.

Physical properties

Tantalum is a very hard, malleable, ductile metal.

Malleable means capable of being hammered into thin sheets.

Ductile means capable of being drawn into thin wires.

The metal has a silvery-bluish color when unpolished, but a bright silvery color when polished.

Tantalum and Tantalum Compounds

Chemical Properties. Like Niobium, tantalum has principal oxidation states þ2 and þ5. Below 100. C, tantalum metal is extremely resistant to corrosion.

Part of the content in this article is reproduced from other media for the purpose of transmitting more information and does not mean that this website agrees with its views or confirms the authenticity of its content. It shall not bear direct responsibility and joint liability for the infringement of such works.

If there is any infringement, bad information, error correction, and other issues in the content of this page, please contact us at info@albmaterials.com

Link to this article: https://www.albmaterials.com/knowledge/chemical-properties-of-tantalum.html