High Density Tungsten Alloy (WNiCu) Rod | ALB-W019
Item No.: ALB-W019. High Density Tungsten Alloy (WNiCu) Rod is made of W-Ni-Cu alloy with purity over 99.95%. Size available: Diameter: 12-320mm; Length: 2-600mm. Standard: ASTM B777.
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Rod Description:
ALB Materials Inc is a global supplier of Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Rod and we can provide customized tungsten products.
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Properties:
- High density (17-18.75g/cm3)
- High melting point
- Wear resistance
- High tensile strength (700-1000Mpa), good elongation capacity
- Good plasticity and machinability
- Good thermal conductivity and electrical conductivity
- Low vapor pressure, excellent thermal stability, small thermal expansion coefficient
- High radiation absorption capacity(30-40% higher than lead), excellent absorption of γ-rays or X-rays
- Non-magnetic
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Applications:
- Used as counterweight, bucking bar, balance hammer
- Used in radiation shielding device
- Used in the manufacture of aerospace and aerospace gyroscope rotor, guide and shock absorber
- Used in machinery manufacturing die-casting mold, tool holder, boring bar and automatic watch hammer
- Used in conventional weapons with armor-piercing missile
- Used in electric products with riveting head and switch contacts
- Used for anti-ray shielding components
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Rod Specification:
Material: Tungsten Nickel Copper (W-Ni-Cu) Alloy
Standard: ASTM B777
Dimensions: Diameter: 2-320mm; Length: 2-600mm
Physical and mechanical properties of Tungsten Nickel Copper Alloy (W-Ni-Cu):
| Name | 90WNiCu | 95WNiCu |
| Material | 90% W 6% Ni 4% Cu |
95% W 3.5% Ni 1.5% Cu |
| Density (g/cc) | 17 gm/cc | 18 gm/cc |
| Density (lbs/in3) | 0.614 | 0.65 |
| Mil. Spec. T-21014 D | Class 1 | Class 3 |
| ASTM-B777 | Grade 1 | Grade 3 |
| Type | Type II & III | Type II & III |
| Hardness; Rockwell C | 24 | 27 |
| Ultimate Tensile Strength; PSI | 94,000 | 94,000 |
| Yield Strength, .2% Offset; PSI | 75,000 | 75,000 |
| Elongation, % in 1″ | 2+ | 2+ |
| Proportional Elastic Limit; PSI | 45,000 | 45,000 |
| Modulus of Elasticity; PSI | 40 x 10E6 | 45 x 10E6 |
| Coefficient of Thermal Expansion x 10E-6/°C (20°- 400°C) | 5.4 | 4.4 |
| Thermal Conductivity; CGS Units | 0.23 | 0.33 |
| Electrical Conductivity; %IACS | 14 | 16 |
| Magnetic Properties | NIL | NIL |
Other Tungsten products:
Pure Tungsten Products:
Tungsten rolling products:
Tungsten (W) Sheets
Tungsten (W) Disc
Tungsten (W) Strip
Tungsten drawing & Forging products:
Tungsten (W) Rod
Tungsten (W) Wire
Tungsten furnace parts:
Tungsten (W) Tube
Tungsten (W) Crucible
Tungsten (W) Machined Part
Other products:
Tungsten (W) Electrode
Tungsten (W) Pellets
Tungsten (W) Sputtering Target
Tungsten (W) Ingot
Tungsten Alloy Products:
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Sheets
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Rod
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Ball
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Part
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Sheets
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Rod
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Ball
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Part
Tungsten Bucking Bar
Tungsten Counterweight Parts
Tungsten Penetrator
Tungsten Radiation Shielding Parts
Tungsten Syringe Shield
Tungsten Collimator
Tungsten Isotope Container
Tungsten Boring Bar / Grinding Quill
ALB-W019
Data sheet
- Item Number
- ALB-W019
- Formula
- W-Ni-Cu
- Size
- custom-made
- Purity
- 99.95%
- Standard
- ASTM B777
8 other products in the same category:
Item No.: ALB-W019. High Density Tungsten Alloy (WNiCu) Rod is made of W-Ni-Cu alloy with purity over 99.95%. Size available: Diameter: 12-320mm; Length: 2-600mm. Standard: ASTM B777.