Tungsten Syringe Shield | ALB-W026
Item No.: ALB-W026. Tungsten Syringe Shield is made of tungsten alloy with purity over 99.95%. Size available: Custom-made per drawing. Standard: ASTM B777.
Tungsten Syringe Shield Description:
ALB Materials Inc is a global supplier of Tungsten Syringe Shield and we can provide tungsten syringe shield as your drawing.
Tungsten Syringe Shield, also called injection shield, isdesigned to reduce hand exposure for clinicians during preparation and administration of radiopharmaceuticals. The barrel of the tungsten syringe shield could be 0.06"-0.08". With great ability of radiation shielding, tungsten syringe shield could reduce radiation exposure from Tc-99m by more than 99% attenuation for Tc-99.
There is no licensing required for tungsten alloy materials. The usage of tungsten heavy alloy in radiation protection is not subject to NRC, EPA, or special OSHA regulations.
Tungsten Syringe Shield Applications:
- Used to reduce hand exposure for clinicians during preparation and administration of radiopharmaceuticals.
Physical and mechanical properties of Tungsten Alloy (W-Ni-Fe & W-Ni-Cu):
| Name | 90WNiFe | 92.5WNiFe | 95WNiFe | 97WNiFe | 90WNiCu | 95WNiCu |
| Material | 90% W 7% Ni 3% Fe |
92.5% W 5.25% Ni 2.25% Fe |
95% W 3.5% Ni 1.5% Fe |
97% W 2.1% Ni 0.9% Fe |
90% W 6% Ni 4% Cu |
95% W 3.5% Ni 1.5% Cu |
| Density (g/cc) | 17 gm/cc | 17.5 gm/cc | 18 gm/cc | 18.5 gm/cc | 17 gm/cc | 18 gm/cc |
| Density (lbs/in3) | 0.614 | 0.632 | 0.65 | 0.668 | 0.614 | 0.65 |
| Mil. Spec. T-21014 D | Class 1 | Class 2 | Class 3 | Class 4 | Class 1 | Class 3 |
| ASTM-B777 | Grade 1 | Grade 2 | Grade 3 | Grade 4 | Grade 1 | Grade 3 |
| Type | Type II & III | Type II & III | Type II & III | Type II & III | Type II & III | Type II & III |
| Hardness; Rockwell C | 25 | 26 | 27 | 28 | 24 | 27 |
| Ultimate Tensile Strength; PSI | 110,000 | 110,000 | 105,000 | 100,000 | 94,000 | 94,000 |
| Yield Strength, .2% Offset; PSI | 75,000 | 75,000 | 75,000 | 75,000 | 75,000 | 75,000 |
| Elongation, % in 1" | 5+ | 2+ | 3+ | 2+ | 2+ | 2+ |
| Proportional Elastic Limit; PSI | 52,000 | 46,000 | 44,000 | 45,000 | 45,000 | 45,000 |
| Modulus of Elasticity; PSI | 45 x 10E6 | 47 x 10E6 | 50 x 10E6 | 53 x 10E6 | 40 x 10E6 | 45 x 10E6 |
| Coefficient of Thermal Expansion x 10E-6/°C (20°- 400°C) | 4.8 | 4.6 | 4.6 | 4.5 | 5.4 | 4.4 |
| Thermal Conductivity; CGS Units | 0.18 | 0.2 | 0.26 | 0.3 | 0.23 | 0.33 |
| Electrical Conductivity; %IACS | 10 | 13 | 13 | 17 | 14 | 16 |
| Magnetic Properties | Slightly Magnetic | Slightly Magnetic | Slightly Magnetic | Slightly Magnetic | NIL | NIL |
Other Tungsten products:
Pure Tungsten Products:
Tungsten rolling products:
Tungsten (W) Sheets
Tungsten (W) Disc
Tungsten (W) Strip
Tungsten drawing & Forging products:
Tungsten (W) Rod
Tungsten (W) Wire
Tungsten furnace parts:
Tungsten (W) Tube
Tungsten (W) Crucible
Tungsten (W) Machined Part
Other products:
Tungsten (W) Electrode
Tungsten (W) Pellets
Tungsten (W) Sputtering Target
Tungsten (W) Ingot
Tungsten Alloy Products:
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Sheets
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Rod
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Ball
Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Part
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Sheets
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Rod
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Ball
Tungsten Nickel Copper (W-Ni-Cu) High Density Alloy Part
Tungsten Bucking Bar
Tungsten Counterweight Parts
Tungsten Penetrator
Tungsten Radiation Shielding Parts
Tungsten Syringe Shield
Tungsten Collimator
Tungsten Isotope Container
Tungsten Boring Bar / Grinding Quill
ALB-W026
Data sheet
- Item Number
- ALB-W026
- Formula
- W
- Purity
- 99.95%
- Size
- custom-made
- Standard
- ASTM B777
8 other products in the same category:
Item No.: ALB-W026. Tungsten Syringe Shield is made of tungsten alloy with purity over 99.95%. Size available: Custom-made per drawing. Standard: ASTM B777.